Roofing America Metal Fabrications: What They Make and How to Work With Them

What Roofing America Metal Fabrications Does

Roofing America Metal Fabrications is a South Carolina-based company that manufactures metal roofing components and custom metal parts for the construction industry. They fabricate standing seam panels, trim pieces, flashing, gutters, and other metal elements that roofers and builders install on residential and commercial projects across the state and beyond.

The company operates as a supplier and fabricator rather than an installer—they produce the materials that roofing contractors and construction companies order and use on job sites. If you are a homeowner considering a metal roof, you would not contact them directly; instead, a roofing contractor you hire would source materials from them or a distributor who carries their products.

Metal roofing has become more common in South Carolina over the past decade, especially in coastal areas where durability against salt spray and high winds matters, and in rural regions where the long lifespan and low maintenance appeal to property owners. Roofing America Metal Fabrications supplies the fabricated components that make those installations possible.

Key Takeaways

• Roofing America Metal Fabrications manufactures metal roofing panels, trim, and flashing—they do not install roofs themselves.
• Roofing contractors and builders order from them or from distributors who stock their products.
• Metal roofing is durable in South Carolina's coastal and rural environments and typically lasts 40 to 70 years with minimal maintenance.
• If you want a metal roof, contact a local roofing contractor who can source materials and handle installation.
• Custom fabrication allows contractors to order trim and flashing sized to fit specific building dimensions and architectural details.

Types of Metal Roofing Products They Fabricate

Roofing America Metal Fabrications produces standing seam metal panels, the most common type of metal roof. These panels interlock along their edges and lie flat across the roof deck, creating a clean, modern appearance. The seams are raised slightly above the panel surface, which helps water shed and prevents pooling.

They also fabricate trim and flashing—the metal pieces that seal edges, valleys, and penetrations where the roof meets walls, chimneys, vents, and skylights. Custom flashing is cut and bent to match the exact dimensions of a building, which is why contractors often order from fabricators rather than buying stock sizes. Gutters, downspouts, and edge trim are also part of their product line.

The metal itself is typically steel or aluminum, sometimes with a protective coating or paint finish that resists rust and UV damage. Coatings vary—some are designed to reflect heat, others to match specific architectural styles or color schemes. A contractor will specify the metal type, gauge (thickness), and finish based on the project's location, budget, and aesthetic goals.

Why Contractors Choose Metal Roofing in South Carolina

Metal roofing performs well in South Carolina's climate. Coastal properties face salt spray and hurricane-force winds; metal roofing resists corrosion better than asphalt shingles and withstands high winds without lifting or tearing. Inland properties benefit from the material's longevity—a metal roof typically lasts 40 to 70 years, compared to 15 to 25 years for asphalt shingles, which means fewer replacements over a building's lifetime.

Maintenance is minimal. Metal roofs do not rot, crack, or develop moss and algae the way asphalt shingles do in humid climates. They shed snow and ice more readily, which reduces ice dam problems in winter. For commercial buildings, the clean lines and modern appearance appeal to owners seeking a contemporary look.

The upfront cost is higher than asphalt shingles, but the longer lifespan and lower maintenance often make the total cost of ownership lower over 30 or 40 years. Some homeowners and businesses also install metal roofing for energy efficiency—reflective coatings can reduce cooling costs in summer.

How to Work With Roofing America Metal Fabrications

If you are a homeowner or property manager, you do not contact Roofing America Metal Fabrications directly. Instead, hire a licensed roofing contractor in your area who has experience with metal roofing. The contractor will assess your roof, discuss options and costs, and then source materials from Roofing America or another fabricator based on your project's needs.

If you are a roofing contractor or builder, you can contact Roofing America Metal Fabrications to request a quote, discuss custom fabrication options, or set up an account for repeat orders. They work with contractors to ensure materials arrive on schedule and meet the specifications of each job. Some contractors maintain standing relationships with fabricators to streamline ordering and ensure consistent quality.

When you meet with a roofing contractor, ask whether they have worked with metal roofing before and whether they have preferred suppliers. A contractor familiar with Roofing America's products and lead times will be better positioned to give you an accurate timeline and price for your project.

Metal Roofing Installation and Timeline

Installation of a metal roof typically takes longer than asphalt shingles—usually one to three weeks depending on roof size and complexity. The contractor must remove the old roof (if replacing), prepare the deck, install underlayment, then lay and fasten the metal panels. Flashing and trim pieces are installed as the work progresses, and seams are sealed or fastened according to the panel system's design.

Weather can affect the timeline. Metal roofing can be installed in cooler temperatures, but heavy rain or high winds may delay work. A reputable contractor will give you a realistic schedule and communicate if delays occur.

After installation, the roof requires little maintenance beyond occasional inspection for debris and clearing gutters. Most metal roofs come with warranties ranging from 20 to 50 years, depending on the coating and fastening system used.

Finding a Contractor Who Uses Quality Metal Roofing Materials

When you are ready to explore metal roofing for your South Carolina property, start by getting quotes from at least two or three licensed roofing contractors. Ask each contractor which fabricators they work with, what materials they recommend for your specific location (coastal, inland, rural), and what warranty they offer on both materials and labor.

Check that the contractor is licensed and insured in South Carolina. The South Carolina Department of Labor, Licensing and Regulation maintains a database of licensed contractors. Ask for references from recent metal roofing projects and, if possible, visit a completed installation to see the quality of the work and how the roof looks after a season or two.

A contractor who sources from established fabricators like Roofing America Metal Fabrications and can explain the differences between panel types, coatings, and fastening systems is more likely to deliver a roof that performs well and lasts as long as promised.

Frequently Asked Questions

How much does a metal roof cost in South Carolina?

Metal roofing costs vary widely based on roof size, panel type, coating, and labor rates in your area. Expect to pay more per square foot than asphalt shingles, but the longer lifespan often makes the total cost lower over time. Get quotes from local contractors for an accurate price for your property.

Can I install a metal roof over my existing asphalt shingles?

Some contractors can install metal roofing over existing shingles if the deck is sound, but most recommend removing the old roof first. Removal adds cost but allows the contractor to inspect the deck for damage and ensures a cleaner, longer-lasting installation. Ask your contractor which approach makes sense for your roof.

Does metal roofing make noise when it rains?

Modern metal roofing with proper underlayment and insulation is no noisier than asphalt shingles. Older metal roofs or those installed directly over bare decking can be louder. A quality installation with sound-dampening materials eliminates this concern.

What colors and finishes are available?

Metal roofing comes in many colors and finishes—from traditional grays and blacks to earth tones, reds, and greens. Some finishes are matte, others glossy or textured. Ask your contractor to show samples or photos of completed roofs in colors you are considering.

How long does a metal roof last in South Carolina's climate?

A well-installed metal roof typically lasts 40 to 70 years in South Carolina, depending on the coating, fastening system, and maintenance. Coastal properties may see slightly shorter lifespans due to salt spray, but quality materials and installation extend durability significantly compared to asphalt shingles.