Get It Done Pressure Washing: What to Know Before You Hire

What Get It Done Pressure Washing Does

Get It Done Pressure Washing is a pressure washing service operating in South Carolina that handles exterior cleaning for residential and commercial properties. The company uses high-pressure water systems to clean driveways, decks, siding, roofs, and other outdoor surfaces. Like other pressure washing contractors in the state, they work with equipment that can remove built-up dirt, mold, algae, and weathering from surfaces that regular cleaning cannot reach.

Before hiring any pressure washing service—including Get It Done—you should understand what the work involves, what it costs, and what questions to ask. Pressure washing can restore a property's appearance, but the wrong technique or pressure level can damage certain materials, so contractor selection matters.

Key Takeaways

• Get It Done Pressure Washing offers exterior surface cleaning for homes and businesses across South Carolina using high-pressure water systems.
• Pressure washing can clean driveways, decks, siding, and roofs, but different surfaces require different pressure levels to avoid damage.
• Before hiring, ask the contractor about their experience with your specific surface type and whether they carry liability insurance.
• Pricing varies based on the size of the area, the type of surface, and how dirty it is, so request an on-site estimate rather than a phone quote.
• Pressure washing is not a one-time permanent fix—surfaces will accumulate dirt and mold again over time depending on your climate and shade.

What Surfaces Pressure Washing Can Handle

Pressure washing works well on concrete driveways, sidewalks, and patios, where high pressure can break up years of dirt, oil stains, and algae growth. Composite and wood decks can be cleaned, but they require lower pressure settings to avoid splintering or gouging the material. Vinyl and fiber-cement siding can be pressure washed, though aluminum siding is more forgiving of higher pressure.

Roof cleaning is more specialized and carries more risk—improper technique can damage shingles or force water under the roofline. If a contractor offers roof cleaning, ask specifically how they do it and whether they use a lower-pressure method or chemical treatment instead of high pressure. Brick and stone surfaces generally handle pressure washing well, but mortar joints can be damaged by excessive pressure, so experience matters here too.

Surfaces that should not be pressure washed include soft wood, stained wood finishes, and some older painted surfaces. A contractor should tell you upfront if your surface is not a good candidate for the work.

Questions to Ask Before Hiring

Ask the contractor whether they have worked on your specific surface type before and can show examples. Request references from recent jobs similar to yours. Find out what pressure level (measured in PSI, or pounds per square inch) they plan to use and why—this shows they are thinking about your material, not just blasting everything at maximum power.

Confirm that the contractor carries liability insurance in case damage occurs or someone is injured during the work. Ask whether they will move outdoor furniture, planters, and decorations, or whether you need to clear the area beforehand. Clarify what the price includes—some contractors charge extra for moving obstacles or treating mold and algae chemically before pressure washing.

Ask how long the cleaned surface will stay clean. The honest answer is that it depends on your climate, shade, and how much moisture the area gets. A shaded, damp driveway will accumulate algae faster than a sunny one. This is not the contractor's fault—it is how South Carolina's humidity works—but it helps you set realistic expectations.

Getting an Estimate

Pressure washing prices vary widely based on the square footage of the area, the type of surface, how dirty it is, and whether chemical treatment is needed. A small driveway might cost less than a large deck or a full house exterior. The only way to get an accurate price is to have the contractor visit and assess the work in person.

When you contact Get It Done or any pressure washing service, describe the area you want cleaned and ask for an on-site estimate. Provide photos if you can—they help the contractor understand the scope. Ask whether the estimate is binding or if the final price could change based on what they find when they arrive. Some contractors offer discounts for multiple areas cleaned at once, such as a driveway and patio together.

What to Expect During and After the Work

Pressure washing is loud and creates a lot of water runoff. If the contractor is working near your home, water may splash against siding or windows. Ask them to be mindful of where the water goes, especially if you have a neighbor's property nearby or if runoff could carry dirt into a garden or pool. The work usually takes a few hours for a typical residential job, though larger properties take longer.

After the work is done, the surface will be wet and may take several hours to fully dry, depending on the weather. Do not walk on a freshly pressure-washed deck or driveway if it is still slippery. If the contractor applied a sealant or protective coating, ask how long you should wait before using the surface and what maintenance it needs going forward.

Maintenance Between Pressure Washings

Pressure washing is not permanent. Dirt, algae, and mold will return, especially in shaded or damp areas common throughout South Carolina. How quickly depends on your specific location and the surface. A sunny driveway might stay clean for two to three years, while a shaded patio under trees might need cleaning every year or two.

Between professional cleanings, you can extend the life of the work by sweeping regularly, removing standing water, and trimming tree branches to increase sunlight. Some surfaces benefit from a sealant applied after pressure washing, which slows down dirt and algae buildup. Ask the contractor whether a sealant makes sense for your surface and what it costs.

Pressure Washing and Your Property

Pressure washing can increase your home's curb appeal and remove safety hazards like slippery algae on walkways. It can also reveal damage—sometimes a dirty surface hides cracks, rot, or other problems that become visible once it is clean. If the contractor spots something concerning, ask them to point it out so you can decide whether to address it separately.

If you are planning to sell your home, a freshly pressure-washed exterior can make a positive impression on buyers. However, pressure washing alone will not fix structural issues or replace needed repairs. It is a cosmetic improvement that works best as part of overall property maintenance.

Frequently Asked Questions

Can pressure washing damage my deck or siding?

Yes, if the pressure is too high or the technique is wrong. Wood decks can splinter, vinyl siding can crack, and roof shingles can be damaged. This is why hiring an experienced contractor who knows how to adjust pressure for different materials matters. Always ask what pressure level they plan to use and why.

How often should I have my driveway pressure washed?

It depends on your climate, shade, and how much moisture the area gets. In South Carolina's humid environment, a shaded driveway might need cleaning every one to two years, while a sunny one might go two to three years. Ask the contractor for their recommendation based on your specific driveway.

Will pressure washing remove all stains from my concrete?

Most stains will improve, but some—like oil stains that have soaked deep into concrete—may not disappear completely with pressure washing alone. Chemical treatments before or after pressure washing can help with stubborn stains. Ask the contractor what they recommend for the specific stains you have.

Do I need to be home while the work is done?

You do not have to stay, but it is helpful to be available to answer questions or point out areas the contractor should pay special attention to. Confirm with the contractor ahead of time whether they need access to water, electricity, or a gate, and make sure those are available when they arrive.

What should I do to prepare for pressure washing?

Move outdoor furniture, planters, decorations, and anything else that could be damaged by water or get in the way. Close windows and doors if the contractor will be working near them. Ask the contractor what else they recommend based on the specific area being cleaned.